TunerPro User Forum

I see the 61 is 160 baud with 20 data items in the datastream. This change will add 6 to the end of that. Channel 1 = 23-24 Channel 2 = 21-22 Channel 3 = 25-26 Ok, this is the part giving me issues. Where do I type in 23 or 24? Go to Aquitition menu... Edit Definition... Goto "Values" Add...

Well I just can't seem to get it. My wb works on the adx file from ajup v4 1026, just not on my 61.adx. I haven't been able to link the values to channel 1. If anyone can fix it, pm a quote on how much you'd charge. Thanks jp86ss, I can at least log the data with another file.

I downloaded the zip files and am going over them. I loaded the ads file and the wb on there works. It reads on my car, so my wideband is working and properly connected. I'm missing something somewhere in the command files. Thanks, I haven't had this much progress in six months.

http://forum.tunerpro.net/viewtopic.php?t=396&start=0&postdays=0&postorder=asc&highlight= I've read that thread soo many times, practically have it memorized. I don't know- how to add the channel, understand what (h/d) values need to be, where to place this info into tunerpro. I don'...

I've been having a huge difficult time attempting to get the wideband working. I tested the power, ground and signal. I'm getting a wb signal, just can't get it to show up on the screen.

I have - APU1 + LC-1

It shows up on the channel 2 on the a/d data. What am I missing?

it was working for a while if I only log 1 or 2 sensors at a time. I haven't messed with it since, but will be trying again this weekend.

leave it at 67 and do this: Acquisition => Edit definition =>commands => add new item => listen for silence name it however, give it an ID, change timeout to 5. now go to the mode 1 ALDL dump request macro, click add new on the right side, select the silence command you just created, move it down a...

robertisaar wrote:correct.

did same thing. i tried at 67 and 65. any other ideas?

ok, so payload offset is 3, payload size is 63, body size is 66.

Should I change body size to 67?

message is in pic -

Acquisition -> Edit Definition check to see which macro is your monitor command, then modify the "reply" of that commands as such: payload offset + payload size should be equal to body size + 1. if not, change the body size to payload offset + payload size + 1. I'm a bit slow at this, so ...

robertisaar wrote:you may be experiencing what i've described as "ALDL collision".

is this with V4 or V5?

V5

I'm using the file from the moates site and it allows me to connect and record. Unfortunately I'm also getting a "spike" every 4-6 seconds. It will start off reading fine, then a few seconds later everything goes off the wall, then normal, then off the wall again. I checked my connections ...

I have the apu1/autoprom and noticed the 4 screws available for extra logging. Craig said the first one is a ground and the others are channels. Is there a way to connect a wideband? Or a "how to" on using the extra channels?

then why sell me an adapter without booster?

Ok, So, i have followed the provided instructions that came with my APU1 set. Also used the HELP section on Tunerpro RT, followed those directions (same as the "Getting Started" card with Moates) and have had no success in emulating. When I load a BIN, I can view it, using the yellow link...

I'm not using an ostrich system. I'm using the APU1.

socket booster? is that the extra thingy that came with the G2?

I have the apu1, trying to emulate onto a 1228746(GM TBI) with a G2 adapter. I get a flickering light, high idle and no control. Is there an instruction sheet/link, detailed enough for a 15 year old to comprehend? I may not be, but my reading abilities aren't very strong.

Nothing else was installed/removed during that time frame. No one else uses my laptop and no one knows my login password.

No worries now, it works.

installed it, ran it, same screen pops up. restarted computer and opened tuner pro, still shows same screen.

****update****

uninstalled tuner pro rt and reinstalled. now works!! yay!!

yeah, its a netbook. i like the lightweight usage. I carry it, my zune, camera, autoprom, obd2 elm and other crap. takes some of the load off.

did that. unistalled and re-installed. still no worky.

I was data logging my car last night (90 tbi camaro). shut down computer and in the morning I got this-


how do I fix this?

does that include odd ball cars? How much to get an aldl .xdf for an 88 cutlass calais? you can save my headache.

On my laptop, if I bring the task bar up(say two spaces) and load tuner pro- I can open the moatees i/o. here are some pics to describe it. http://i15.photobucket.com/albums/a351/monkihead/1bar.jpg http://i15.photobucket.com/albums/a351/monkihead/1bardown.jpg Can't see "cancel" or "Cl...