TunerPro User Forum

just curious about the size of the xdf's out there currently mine is 1.9mb with some roughly 200maps 76errorcodes and some 500settings and some 70 axis .. this from a 1mbit chip and bosch motronic 4.4 mark: you'll be seeing this soon maybe some performance updates to cope with this ammount of data ?

i'm kinda wondering about the realtime trace and updating when pressing + and - in maps when in 3d maps it does realtime updates and updates checksums etc is it possible to combine the two ? get trace and realtime updates while pressing + and - inside 2d maps ? aswell as getting realtime trace in 3d...

i'm able to upload / download to ostrich but when doing map changes and press update/save map i get error if i start tunerpro without ostrich connected i still can't do any changes to maps even though tunerpro marks changes wit a * it seems all changes are lost as when i open a map do a change and s...

for me .. i have still same issue .. not saving maps at all .. even though bin size is correct


using 80000h bin with 60000h offset .. and won't save

when getting very high load readings .. in my case i suppose it's a base map setting max amm load / rpm .. though where theese settings are located i don't yet know .. .but when passing 0vacuum i get very high load readings. so i have to lower or possibly raise what load i'm supposed to get.. as whe...

haven't yet tried connecting my techedge to do tracing yet.. but will i be able to do map tracing with this aswell .. or will i just get seperate graphs ?



would be sweet to do rpm throttle and exhaust temperature mappings this way .. as we got most constants etc in ecu?

ended up with buying a dil32 to plcc32 adapter from epboard works like a charm the E32-0035 is at 41$ and well worth the money me and a friend of mine is running this setup daily with no hickups other than that the ostrich does loose it's memory in certain conditions when the usb cable touches groun...

been looking into why my motronic 4.4 for my volvo 960 disables all lambda adaptations on my car when going over 7 in load basically i have done an engineswap fron na 6cylinder to twinturbo 6cylinder and also swapped the hfm sensor to one with greater range now my issue is that when above 2000rpm an...

trying to find out the root of some issues we have with motronic 4.4 as we use an adapter from dil32 to plcc32 also using 1mbit memoy we encounter when doing live tracing all traces are at a h6000 offset and trying to find out the root of this issue we actually believe it's connected somehow to the ...

i would suggest reading this site..

http://www.wbo2.com/lsu/lsuworks.htm


that will give you an understanding on why wideband lambda needs a controller

didn't quite get how to translate this formula into tunerpro .. 2. Fixing checksums Your M4.4 file has two checksums (one for block 0 - file offset 0x0 - 0xFEFF, and another for block 1 - file offset 0x10000 - 0x1FEFF). After you made corrections in those regions (like lambda disabling) - checksums ...

merror wrote:I use and work very good.

happen to have any suggestion on where to find a good not to pricey one ?

do any of you use ostrich 2 and plcc32 adapter ?


i'm about to test this out in a newer motronic 4.4 system and just wonder if there are any hickups before i buy a dil28 to plcc32 adapter

revlimit wrote:

moon_walk wrote:any news on the address tracing yet?

address tracing works but it needs more work to get it just right so just wait till the version 5 comes out and don't forget to donate.

eny expected eta ? btw already have donated

map locations i do have but hard to see what load and what rpm i'm actually using .. 16x16 and picking the right one is hard enough

any news on the address tracing yet?

When will the new RT version be avalible with tracing ?

i find it hard to see what maps i actually use

is it possible to get this soon ? i saw a post with it in january stating it will come in next version?


i also use an ostrich 2 with a motronic 1,8 ecu fully working