TunerPro User Forum

scott0999

I have a 86 Fiero GT 2.8

downloaded the $24 ads. it connnects fine, but shows no information. I'm just trying to display sensor info with the engine not running (since it doesnt start) for diagnostics reasons.

I notice a note about using a 10k resistor.. so where do I put it? thanks

scott0999

I dont really want it to export anything. Surely you do. sorry that was a typo, I meant everything. but anyway regardless I would like it like before. I'm using a VE calculator spreadsheet thats setup for the way V4 exports. I like the data tracing in V5, but the log exporting isnt working the way ...

scott0999

I would have to agree. bring it back, or give it the option please!

scott0999

I dont really want it to export everything. I would prefer it worked just like it did before, or if you could preset it to work that way even

edit for typo

scott0999

When I goto export the datalog, it shows a list of 151 things to select that you want in the log

is there a way to make it export like it did in TP4, where you dont have to choose what you want?

scott0999

yoda69 wrote:2. ALDL datatracing. You need to link the ALDL and xdf together for each table in the xdf. Not all will be able to be done, only those that have both axis information on the ALDL stream.

ok sounds like this is what I need to do. is this how its setup?

scott0999

does it record tracing for all tables, or only 1 at a time?

did you hit the A in the table before recording, or just record?

scott0999

ok I finally tried this today. tracing works fine when just showing live ALDL data. I recorded a datalog and played it back.. the tracing doesnt show in the tables at all

scott0999

I understand we now have a tracer for live ALDL data. honestly I havent even used it yet, but I was wondering does this work for playing back the datalog too?

it would be great if the tracer would follow the datalog playback!

scott0999

is there a way to view more than 6 sensors at once in the aldl dash?

scott0999

it seems no matter what I set my bpc vs egr to, or how high I increase the VE tables, cell 1 BLM is always 134 with the slightest tap of the throttle

is there a way to reset it within tunerpro?

scott0999

whats the double?

scott0999

I have installed 39# injectors and using $8F. I changed the INJ flow rate #/hr, but do I need to change the "INJ flow rate per single fire". its located at 65E hex I adjusted the bpc vs egr as well and the car is driving good. I just want to make sure the ECM has all the correct settings. ...

scott0999

when datalogging it would be great if I could get an audible alert if there was knock. or how about if you could configure any sensor to give an alert when it reaches a certain point

scott0999

Skunk wrote:How about just being able to open/view a second XDF/BIN for a manual comparison.

John

that sounds like a much easier solution. the more I think about it, comparing with different XDF's would be difficult to code

scott0999

when I datalog is there a way I could choose whats datalogged?

reason im asking is I normally organize my datalog so the BLM, INT, RPM, MAP, and KNOCK are together

it would be great if I could just datalog what I need, and if I could choose the order they show up that would be a plus

thanks

scott0999

I have 2 bins that are for a similar setup, except the code mask is different on them. it would be nice to be able to select the XDF for the compare bin

scott0999

the CSV viewer I use wont open the CSV with the first line tunerpro creates. is there a way to not have that in every datalog?

scott0999

I just got done successfully tuning my part throttle, but am still having stalling problems consistently the INT will drop when comming to a stop, then it stalls. Ive tried leaning it out in the low rpm table, but then it stalls on idle when I first start the car, or stalls before I even come to a s...

scott0999

if just tunerpro is open and im not on the aldl setup screen it resumes normally.

no biggie, I can just close the aldl screen before putting it to sleep mode

scott0999

ok will do. he must of had a different FPR

scott0999

when I get done datalogging I close the screen on my laptop. it is on the aldl setup screen when I do this then when the laptop comes back up from sleep mode, tunerpro is unresponsive to the point I have to do a hard shutdown. its a dell latitude cpx laptop with a p3-600, 512 ram, windows xp home sp...

scott0999

im using a bin that was supposed to be tuned for #30 injectors. the person I got it from had a similar setup to mine except he had a supercharger, I have a turbo for some reason he put 35.94 as the injector rate/hr. im not sure why he did that, and my car has been running decent considering. but my ...

scott0999

in the datalogs its hard to find a map reading exact to the rpm like it has in the table anyways. so that makes sense why theres .39 resolution. it would take alot of datalogging and searching to match up to the tables so exact.

scott0999

ok thanks for clearing that up

time to burn 100 chips to get this thing right

scott0999

ok so essentially once I get this tuned, making VE changes by .39, I should be able to get a BLM of 128 when I look at the table it seems like .39 would be too much of a step up/down since the values are small to begin with so im assuming once tuned, the INT should adjust enough not to change BLM fr...

scott0999

for instance in a datalog if the blm was 133 at 1800rpm & 20kpa I would do 133/128=1.039 then I would look in the table under 1800rpm@ 20kpa and it would have 5.86 as the VE so I would go 5.86*1.039=6.09 (rounded up) if I try and enter 6.09 it wont save that. it would only save 6.25 I understand...

scott0999

im trying to tune my "FUEL Low RPM VE % vs RPM" table. I type in the value I calculated, press enter, it shows in the table and is red. I click save, close the table and go back into it. then the values are back to what they were before. it will only save certain values. how am I supposed ...

scott0999

Sweet. It's good to hear that the data is matching up. Tuning with the WB is the right thing to do, but you should realize that without going into open loop, tuning will only affect the regions that aren't ECM corrrected (WOT tuning necessitates the WB). Everywhere else the computer corrects the fu...

scott0999

I'd start by reading and re-reading all the stickies at the top of this board: http://www.thirdgen.org/techboard/diy-prom/ Then post there when you feel like you've digested what you can and have some specific questions. You're on the right track (you've got the right equipment)! thanks for the rep...

scott0999

I've been reading alot about tuning but still not finding the information I need. I just got idle and 1st-3rd gear datalogs. its showing a little knock retard in 3rd gear and AFR is far from tuned. I'm not really sure where to begin so if someone can give me a good link or take a look at these datal...

scott0999

sweet thanks!

scott0999

That functionality will be in in the next major TunerPro release. In fact, a full patch creation and importation engine will be in the next major release. =) ok, now for the ones that say "item not defined", how do I change those settings in the bin im patching manually? I will be looking...

scott0999

from using the difference tool, I can select the differences but cannot figure out how to add them into another bin all at once?

in essence making a "patch" file

scott0999

hello, this is my first post on this site. I have tunerpro rt installed and I have the aldl cables for my car. I know how to datalog but have never tuned before. what am I looking for and what do I change?

TunerPro User Forum

Search found 35 matches

$24 connects, but no data

log exporting in TP5

tracer for datalog playback?

ALDL Dash

how to reset BLM?

$8F INJ flow rate per single fire

audible sensor alerts

can I choose whats datalogged?

using difference tool with different XDF's

removing header from csv?

INT dropping on decel, but no BLM change?

non responsive when resuming from sleep mode

injector rate question

not saving ve values

got a WB02 datalog now how do I ..

importing differences from a bin

new to tuning need help