TunerPro User Forum

Hi Team,

Can anyone help point me in the direction of where the overun fuel tables are?
I believe there are two one for in D/R and a second for P/N/Manual

Cheers,
Nick

Looking for a definition for my m40b16, or even just the location of the ignition and fuel maps. Mainly after the idle ignition.
0261200174
Software version: 1267355790

stock bin attatched

You're lucky I have a XDF for 402 599, here it is : https://transfernow.net/41i2k233o85w not "full xdf" but you'll find all you need . All tables after "closed loop lambda" are wrong because I used a 403 xdf as basis and didn't delete those ^^ The idle ignition didn't seem to do...

Evil wrote:is it a soft 098 or 599?

I have no XDF for 402 but I can find map for burble easily (very similar to 403)

https://drive.google.com/open?id=1tkNE5 ... xm_b4EXBU3

Im a noob. thought it was 599 not sure though.

Unfortunately I didn't keep it, sorry... but if you need I can tell you map adresses for your 402. Tuning for pop1bang is not so different than the rest, just set an AFR on overrun and try different ignition angles depending on which type of pops you want. A good thing to do could be to extend Idle...

I did some tests on a 403. First you have to set overrun fuel cut to the same value than your rev limit, To allow fuel injection on overrun. Then you have to play with fueling and ignition on idle maps. The problem is that there must be a limit in "ignition angle variation speed" or somet...

Hey lads, Been experimenting with tuning my 325 non vanos's, it has a 402 dme. Can anyone show me how/ slash point me in the right direction of getting it to burble. I had a mess around on the partial throttle fuel + ignition maps. But it didn't seem to make any difference. Any help is appreciated, ...