pooh, i hope I can explain it with my english....
it's for the ostrich -
is there a way to show changing values in a cell, for example where the pressure value is passed?
written in cell 01h; maybe 00h for vakuum and FFh for 2bar pressure?
and the changing value is shown continuously?
with best regards
bernhard
show the value of a cell continuously
Moderators: Mangus, robertisaar, dex
- Six_Shooter
- Posts: 590
- Joined: Sun May 06, 2007 7:32 am
thx!
It's a pity. I've hoped, with Ostrich there is also an opportunity to show the ram, where the value of pressure etc. is commited to the ecu.
so like man-in-the-middle
ok, this will not work...
one way may be, to write a little program into the ecu, which jumps to a special adress when pressure is on value x, next adress when pressure is on value y and so on.
like the other tables on data-tracing, misused as a gauge?
my intention is, to have a mini-dashboard with the main values like pressure, rpm, airtemperature.
with best regards
Bernhard
It's a pity. I've hoped, with Ostrich there is also an opportunity to show the ram, where the value of pressure etc. is commited to the ecu.
so like man-in-the-middle
ok, this will not work...
one way may be, to write a little program into the ecu, which jumps to a special adress when pressure is on value x, next adress when pressure is on value y and so on.
like the other tables on data-tracing, misused as a gauge?
my intention is, to have a mini-dashboard with the main values like pressure, rpm, airtemperature.
with best regards
Bernhard