Internal Label
Moderators: Mangus, robertisaar, dex
-
- Posts: 15
- Joined: Thu Jun 29, 2006 9:57 am
Internal Label
Here's my problem....NISSAN BIN...I have a 16x16 matrix starting at $7D00....this is a fuel enrichment table where the x and y axis are both related to an RPM scale and TP scale located at another point in the bin.....I want all of the rows in my table to be labeled by my RPM scale located from $7B00 - $7BFF. So in my row tab in the xdf editor I used the pull down menu and selected Internal, pure. I then typed in the address with my starting address of $7B00 and the data size 8 bit. I think the address step is where I am going wrong. I have tried numerous values and nothing has worked for me. What I thought would work was +0001. But it hasn't. I have tried a whole lot values and failed on each one. Can anyone help me out? Thanks!
Twin Turbo 300zx
-
- Posts: 15
- Joined: Thu Jun 29, 2006 9:57 am
FIXED
Got it....stupid mistake.....had the row label type set up for string (forgot to change it over) stupid me!!
Twin Turbo 300zx