I just created a stack bin file (bin=4K, chip size=32K and switch block=4k) and did some testing to make sure I had everything in the correct order. I notice the order of building the bin file is backward to what I would expect. I am building my own Expander Board for the 747ECM using 28C256 EEprom IC and would assumed Position “0” would be no Hex-Offset and Position-1 would have a offset of 4K and so one... I have a Word Doc. showing my result and would be happy top send it to anyone interested.
Byron Taradena
Bin Stacking Order
Moderators: Mangus, robertisaar, dex
-
- Posts: 7
- Joined: Thu May 08, 2003 8:17 am
- Location: Tucson, Arizona