What XDF and BIN for 94' S-10 W/Flashprom

Discuss General Motors (GMC, Chevy, Pontiac, Hummer, Cadillac, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
slewis
Posts: 3
Joined: Fri Oct 26, 2007 10:40 am

What XDF and BIN for 94' S-10 W/Flashprom

Post by slewis »

Thinking about tuning a 94' S-10 4.3 standard trans "Z" motor with a Flash PCM, but don't have a clue where to access the info, or even if my Moates Autoprom and TunerPro are capable. Familiar with modding/tuning, however it was with OD code and EEProms. Anyone info on how to go about it apreciated.
923.4v6
Posts: 5
Joined: Sun Jan 11, 2009 5:23 pm

Re: What XDF and BIN for 94' S-10 W/Flashprom

Post by 923.4v6 »

slewis wrote:Thinking about tuning a 94' S-10 4.3 standard trans "Z" motor with a Flash PCM, but don't have a clue where to access the info, or even if my Moates Autoprom and TunerPro are capable. Familiar with modding/tuning, however it was with OD code and EEProms. Anyone info on how to go about it apreciated.
Are you sure you have a flash pcm? A friend of mine has the "W" engine in a 94 s-10 and it has a 7730 which also uses the 0D. The "Z" engine is the tbi one isn't it.
Post Reply