Saving ALDL information
Moderators: Mangus, robertisaar, dex
Saving ALDL information
Having an issue with latest version not saving, when adding lookup tables, or changing anything in general with ALDL.
Loaded older version, and it worked. Reloaded new version, and it reads the change ADS file, but still can't make changes in new version.
Just updated this computer few minutes ago same thing.
Loaded older version, and it worked. Reloaded new version, and it reads the change ADS file, but still can't make changes in new version.
Just updated this computer few minutes ago same thing.
92 Typhoon
91 Syclone
91 Syclone
Just downloaded latest on this computer also. (I think I have 5+ computers I move between in life now)
Same thing.
Opened ALDL panel, did edit, went to the 749 ads Paul and I have worked on, opened up Target AFR, added Unit Label "AFR"
Hit save and close.
No change on dash.
Go back into edit, look at unit label, nothing.
Had same problems when adding a lookup table for a WB sensor for local guy.
Had to go back to older 4.0 version to add lookup table.
A side note, the lookup tables can be a great way to add for the various WB outputs, just let the WB spit out raw data and convert it in tunerpro.
Same thing.
Opened ALDL panel, did edit, went to the 749 ads Paul and I have worked on, opened up Target AFR, added Unit Label "AFR"
Hit save and close.
No change on dash.
Go back into edit, look at unit label, nothing.
Had same problems when adding a lookup table for a WB sensor for local guy.
Had to go back to older 4.0 version to add lookup table.
A side note, the lookup tables can be a great way to add for the various WB outputs, just let the WB spit out raw data and convert it in tunerpro.
92 Typhoon
91 Syclone
91 Syclone
Thanks, seems to be working now.
Another MINOR one I saw though.
If you change dash readout on one of the squares to something else.
Then go back into ALDL edit, close edit come back.
Dash is changed back.
Quit program, reload fixes it though.
Again Mark this program is awesome. All the new features, and having aldl and tuning in one kicks ass.
Another MINOR one I saw though.
If you change dash readout on one of the squares to something else.
Then go back into ALDL edit, close edit come back.
Dash is changed back.
Quit program, reload fixes it though.
Again Mark this program is awesome. All the new features, and having aldl and tuning in one kicks ass.
92 Typhoon
91 Syclone
91 Syclone
I downloaded the fix and can now change and save. Thank You. I do have one problem still though. When I hit the record button it says sampling and the number of samples goes up like ususal, Then when I stop the recording and add the notes, I hit the play and it goes to -6 samples and does nothing. I even tried to play back other files/runs I have played back before and it does the same thing. Is there something wrong with the settings on my end?
Thanks
W Robbins
Lousiville, KY
Regestered User
Thanks
W Robbins
Lousiville, KY
Regestered User
I just took a couple of test logs on the bench and it works. I did notice that in the setup window -6 is shown for the sample number, but the log seems to play back OK nonetheless.
Can you zip up the problematic log and email it to me?
Can you zip up the problematic log and email it to me?
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am
Hey Mark, I dont think use low end guys are seeing your email button.
Anyways, did some more playing today. Overall things are good.
Few little issues.
Randomly the top right dash value would change background color to black and blue.
Also, had 1 time the record button was dimmed after about 3 recordings. Closed tunerpro, reopened things back to normal.
Anyways, did some more playing today. Overall things are good.
Few little issues.
Randomly the top right dash value would change background color to black and blue.
Also, had 1 time the record button was dimmed after about 3 recordings. Closed tunerpro, reopened things back to normal.
92 Typhoon
91 Syclone
91 Syclone
[quote="Ty1295"]
Randomly the top right dash value would change background color to black and blue.[/quote]
Hmm. I can think of zero reason why this would occur. The code that changes the background of the gauges color doesn't get touched anywhere in TunerPro outside of the gauge code itself! I wonder if anyone else has seen this.
About the email addr - yup, turns out I'm hiding it.
Randomly the top right dash value would change background color to black and blue.[/quote]
Hmm. I can think of zero reason why this would occur. The code that changes the background of the gauges color doesn't get touched anywhere in TunerPro outside of the gauge code itself! I wonder if anyone else has seen this.
About the email addr - yup, turns out I'm hiding it.
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am