Page 1 of 1
M3.3.1 506 Injector scaling
Posted: Tue Mar 27, 2018 7:27 am
by hotdish
How do I properly scale the maps in a 506 bin for larger injectors? I tried a couple things after searching the forum and the engine still seems to be too rich to start.
Posted: Wed Apr 04, 2018 10:01 am
by aboutton
what MAF are you using ?
injectors size ?
Fuel pressure ?
Posted: Wed Apr 04, 2018 12:47 pm
by hotdish
aboutton wrote:what MAF are you using ?
injectors size ?
Fuel pressure ?
Stock e36 m3 s50b30us MAF (for now)
80lb injectors
3.5 bar
Posted: Thu Apr 05, 2018 10:49 am
by mohamedramli
i am also looking how to scale injector in 506 ecu. I found this info in another forum about scaling
https://www.r3vlimited.com/board/archiv ... 48360.html
Posted: Mon Apr 09, 2018 12:00 pm
by aboutton
you must use a larger housing for the maf or the maf will maxout quickly
buying a HPX maf is the best choice
Mohamed Ramli i sent you the XDF and the bin to your email and sorry again for the later reply, Drift season has started.
