Hardware and software options to read/write .bin files
Moderators: Mangus, robertisaar, dex
-
- Posts: 17
- Joined: Thu Jan 27, 2022 3:57 pm
Hardware and software options to read/write .bin files
So, I know there's a lot of options as far as read/write hardware and software, and a lot of it depends on what you're working on.
Right now, I have a Continental M3C ECU that I need to read and write .bin files. Looks like my only "off the shelf" option is sold by Bitbox and using a J2534 OBD2 Canbus interface (Mongoose). The J2534 interface is a common device. Other options I've seen are the Alientech Kess and KTAG devices, or their chinese knock-offs.
Any suggestions for open source projects that read/write .bin files?
Any possibility of a plugin for TunerPro to use the J2534 interface?
And, is anyone aware of a plugin that works with TunerPro to read/write .bin files?
Right now, I have a Continental M3C ECU that I need to read and write .bin files. Looks like my only "off the shelf" option is sold by Bitbox and using a J2534 OBD2 Canbus interface (Mongoose). The J2534 interface is a common device. Other options I've seen are the Alientech Kess and KTAG devices, or their chinese knock-offs.
Any suggestions for open source projects that read/write .bin files?
Any possibility of a plugin for TunerPro to use the J2534 interface?
And, is anyone aware of a plugin that works with TunerPro to read/write .bin files?
-
- Posts: 17
- Joined: Thu Jan 27, 2022 3:57 pm
Re: Hardware and software options to read/write .bin files
So, looks like there's some other hardware/software options. I haven't downloaded any of this software to play with it yet, but soon...
Pass-through devices:
http://www.dashlogic.com/products/j2534
Software:
http://www.dashlogic.com/downloads
Pass-through devices:
http://www.dashlogic.com/products/j2534
Software:
http://www.dashlogic.com/downloads
-
- Posts: 17
- Joined: Thu Jan 27, 2022 3:57 pm
Re: Hardware and software options to read/write .bin files
Decompiler, debugger, and reverse engineering software...
WinOLS is a common application for reverse engineering .bin files:
https://www.evc.de/en/download/
Free and low cost versions here:
https://hex-rays.com/IDA-pro/
And another:
https://ghidra-sre.org/
WinOLS is a common application for reverse engineering .bin files:
https://www.evc.de/en/download/
Free and low cost versions here:
https://hex-rays.com/IDA-pro/
And another:
https://ghidra-sre.org/
-
- Posts: 17
- Joined: Thu Jan 27, 2022 3:57 pm
-
- Posts: 17
- Joined: Thu Jan 27, 2022 3:57 pm
-
- Posts: 17
- Joined: Thu Jan 27, 2022 3:57 pm
Re: Hardware and software options to read/write .bin files
And these guys seem to have taken over the openecu.org project. A lot of coverage for Subaru and Mitsubishi vehicles with a free/open source tuning application and their own J2534 interface:
https://www.tactrix.com/
https://www.tactrix.com/
-
- Posts: 17
- Joined: Thu Jan 27, 2022 3:57 pm
Re: Hardware and software options to read/write .bin files
No comments from anyone yet? I'm just getting started....
-
- Posts: 17
- Joined: Thu Jan 27, 2022 3:57 pm
-
- Posts: 17
- Joined: Thu Jan 27, 2022 3:57 pm
-
- Posts: 17
- Joined: Thu Jan 27, 2022 3:57 pm
-
- Posts: 1
- Joined: Thu Nov 10, 2022 5:10 am
- Contact: