405 Burble/Pops and Bangs

Discuss Bosch (Porsche, BMW, Volvo, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
dead7ucky
Posts: 3
Joined: Wed Apr 24, 2024 2:51 am
Location: Ukraine

405 Burble/Pops and Bangs

Post by dead7ucky »

Hi all. Who can share the XDF file with the fuel restore address for 405 EBU. I will be very grateful
dead7ucky
Posts: 3
Joined: Wed Apr 24, 2024 2:51 am
Location: Ukraine

Re: 405 Burble/Pops and Bangs

Post by dead7ucky »

I've read about this. Perhaps someone has already done this and there is a well-known map. Without an emulator it really won't be easy and time-consuming. There is another question: which variable is responsible for turning off the oxygen sensor?
dead7ucky
Posts: 3
Joined: Wed Apr 24, 2024 2:51 am
Location: Ukraine

Re: 405 Burble/Pops and Bangs

Post by dead7ucky »

This is probably the wrong firmware. Mine ends with 01548. And the data from this card does not match. In the firmware you were looking for 64 kb. Although the standard for 402.403.405 motronics is 32kb
Post Reply