What's are your log settings for logging Gen3
Moderators: robertisaar, dex
What's are your log settings for logging Gen3
Total newb here. Getting my obdlink in a few days. Just wondering what your settings to log off MAF and off VE tables. What I am looking to do is start with my 2001 Silverado to tune using narrow bands and MAF. Then will have a wideband in a couple weeks to either tune my Silverado with it or go straight to tuning a LR4 turbo I put in a Firebird using decappeds I will flow when my pump gets here. I have been watching Gen3 tuning videos using HP Tuners and was trying to transfer settings to TunerPro to try and replicate what I see in hot how to vids. Thanks
Re: What's are your log settings for logging Gen3
If you mean the OBDWIZ scanner software that comes with the OBDLINK interface
Use Config to add these PIDs
Use Config to add these PIDs
- Attachments
-
- OBD2 PIDs
- obdwiz.jpg (229.59 KiB) Viewed 5422 times
Re: What's are your log settings for logging Gen3
i know this an older post but I have a similar issue. How do you add pids to OBDWiz that arent there? The lack of knock has annoyed to hell out of me. I've always logged ignition timing to look for the evidence of a knock.