Report bugs found in TunerPro. Please be sure to include as much info as possible, including system specs, OS, repro steps and TunerPro version number.
I use version 4.14 , with moates APU1 AutoProm , and this is hapend when i put a chip in the autoprom and download the info too tunerpro, i have triied different chips and no success.
anyone knows what is the problem??
i have tryed several XDF`s and still got the same problem,
the XDF i use here is from an nissan S13 i download here from the forum, and use the moates to read from the chip from the ecu in the car.
Mangus wrote:Are you sure that the bin is valid (that it was read properly), and that the XDF is the proper XDF for the bin?
yes i pretty sure , but if you or any one could e-mail me postmaster@voldenracing.no a working bin and XDF, of any car , so that i could try it.
?
thanks
Mangus wrote:Are you sure that the bin is valid (that it was read properly), and that the XDF is the proper XDF for the bin?
yes i pretty sure , but if you or any one could e-mail me postmaster@voldenracing.no a working bin and XDF, of any car , so that i could try it.
?
thanks
kenneth
There are matching XDF and BINs installed with the software - 6E.xdf and arap.bin (or apyp.bin).
***************************************
TunerPro Author
1989 Trans Am
Ok, I guess I'm going jump in here and say that I've also been completely un-successful in downloading a bin from my ostrich2.. My bin is 32k, and I can load and use all 8 spots on it, but trying to read the bins back from it never works.
Whatever I'm getting back from the ostrich does not match anything on my original bin at all, and if I'm loading all 8 spots something on the dump should match my original bin somewhere. I've always assumed that since there was no existing XDF for my bin, it was my own screw-up. Now I'm starting to wonder.
I guess that if someone can point me to a known good matching bin/xdf from something else, I'll load that on my ostrich and see if it dumps right.
(edit.. saw the post above, I'll have a try this weekend and let you know)