It would be nice if the program allowed block fill with constants, like hex editors provide (to avoid having to use a hex editor as well).
It would also be nice if the program provided an interpolation function between values in an array or table - so that the end points could be defined and the program does the hard work of filling in the blanks.
Robin
Hex editor features
Moderators: Mangus, robertisaar, dex
Re: Hex editor features
[quote="Robin Handley"]It would be nice if the program allowed block fill with constants, like hex editors provide (to avoid having to use a hex editor as well).
It would also be nice if the program provided an interpolation function between values in an array or table - so that the end points could be defined and the program does the hard work of filling in the blanks.
Robin[/quote]
block fill would be quite easy. Look for this in the next version.
Interpolation would be a bit more complicated (especially since the grid control doesn't support multiply selection), but is possible. I'll put that on the list. Thanks!
Let me know what else you come up with or if you find any bugs!
It would also be nice if the program provided an interpolation function between values in an array or table - so that the end points could be defined and the program does the hard work of filling in the blanks.
Robin[/quote]
block fill would be quite easy. Look for this in the next version.
Interpolation would be a bit more complicated (especially since the grid control doesn't support multiply selection), but is possible. I'll put that on the list. Thanks!
Let me know what else you come up with or if you find any bugs!
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am
Re: Hex editor features
[quote="Robin Handley"]It would be nice if the program allowed block fill with constants, like hex editors provide (to avoid having to use a hex editor as well).
Robin[/quote]
OK. This has been added. I'll work on an interpolation solution in the near future.
Robin[/quote]
OK. This has been added. I'll work on an interpolation solution in the near future.
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am
-
- Posts: 15
- Joined: Mon Apr 07, 2003 12:54 pm
Re: Hex editor features
That's good.
BTW: If you need any input on interpolation algorithms, give me a shout.
Robin
BTW: If you need any input on interpolation algorithms, give me a shout.
Robin
1) Besides linear, what would be useful?
2) when there is a low number of data points (say, you're trying to interpolate between the end points of a row of 5 values, say 1 to 2) and given the value conversion, you can only increment in say, .25 increments, how should the error/rounding be handled?
for instance
row: 1, 1.25, 1.25, 1.25, 1.25
you want to inperpolate between 1 and 2, but can only increment in values of .25 ... what should happen? this?
row: 1, 1.25, 1.50, 1.75, 2.0, 2.0?
where should the error be placed? needs to be placed somwhere, right?
2) when there is a low number of data points (say, you're trying to interpolate between the end points of a row of 5 values, say 1 to 2) and given the value conversion, you can only increment in say, .25 increments, how should the error/rounding be handled?
for instance
row: 1, 1.25, 1.25, 1.25, 1.25
you want to inperpolate between 1 and 2, but can only increment in values of .25 ... what should happen? this?
row: 1, 1.25, 1.50, 1.75, 2.0, 2.0?
where should the error be placed? needs to be placed somwhere, right?
-
- Posts: 15
- Joined: Mon Apr 07, 2003 12:54 pm
-
- Posts: 15
- Joined: Mon Apr 07, 2003 12:54 pm
not quite. unfortunately the grid control (the control that displays the table itself) that i wrote doesnt support multiple selection. i'd have to do some extensive work to implement this.
i was thinking of just creating a dialog that allows you to click each cell in the table and add it to a list, then do the interpolation.
truth be told, im not sure yet how i will do it. i'll cross the bridge when i come to it. =)
i was thinking of just creating a dialog that allows you to click each cell in the table and add it to a list, then do the interpolation.
truth be told, im not sure yet how i will do it. i'll cross the bridge when i come to it. =)
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am