What I have is a modified bin file and a stock bin,,,,, All I have now a cheap ass eprom programmer... I only no how to copy and burn a eprom,,, But want help to try to tune my car,,,,,, The modified bin file I have is supposed to have the ability to run 440cc injectors and adjusted Fuel and Timing and Boost Cut disabled...... The Mazda mx-6 turbo 88-92 and Ford Probe 89-92 share the same ECU,,,,,,,,,,,,
THANKS,,,,,,,,
MODIFIED EPROM
http://www.mediafire.com/?ljx9e7yevum
STOCK EPROM
http://www.mediafire.com/?sharekey=af0d ... f6e8ebb871
Help with 89 Ford probe GT
Moderators: robertisaar, dex
- DolceHawtie
- Posts: 2
- Joined: Thu Aug 20, 2009 11:49 am
-
- Posts: 15
- Joined: Sat May 14, 2011 1:36 pm
F2T 92 XDF Help!
I need also some help with this XDF (92 Ford Probe 2.2T)!
We need to tweak the injector compensation (global) and the revlimit!
Can someone help with the addresses and the calculations?
THX!
We need to tweak the injector compensation (global) and the revlimit!
Can someone help with the addresses and the calculations?
THX!
DolceHawtie wrote:check your pm...i sent you some good info
91 Galant VR-4
-
- Posts: 15
- Joined: Sat May 14, 2011 1:36 pm
Re: F2T 92 XDF Help!
I know someone made chips for these cars, theres 3-5 versions so someone had the means to read the chip and change it. Its one of the things i hate about my probe aside from the fact no one realizes its a mazda 626/mx6 turbo ecu and not ford.
eddieDSM wrote:I need also some help with this XDF (92 Ford Probe 2.2T)!
We need to tweak the injector compensation (global) and the revlimit!
Can someone help with the addresses and the calculations?
THX!
DolceHawtie wrote:check your pm...i sent you some good info
-
- Posts: 2
- Joined: Fri May 13, 2011 6:54 am
-
- Posts: 2
- Joined: Wed May 19, 2021 12:45 pm
Re: Help with 89 Ford probe GT
Can anyone re-upload these bins?