TunerPro User Forum

The bin file is not corrupted. All the file is comparable except for the maps. They are all over the place and as I said if I swap them around the compare bin maps are all over the place. On there own all is OK and workable but it's when you compare where the problem is. I must have a setting wrong ...

No same XDF just 2 different bin files created with that XDF. Weird I know because it did work in the past. Thanks for your input

Found if I put the wanted file onto my desktop it links to TunerPro and it works fine.

Hope someone can help. I am using TunerPro RT and when I use the bin compare feature the bin I an comparing with is nothing like it should be eg timing at 0 instead of the acual 30 degrees. If I switch them around and use my original bin as the compare bin it now is way off the mark. In other words ...

Just wondering if your taking the reading static without the engine running. If you are try with the engine running (need to be quick for chance of over-revving) The reason I question is you may have a voltage drop and the best way to find it is under actual working conditions. Regards Dave

I also need to get an XDF for a Hyundai I30 CRDI. I have the ECU file but need an XDF. I have found on the net lots of development for this engine in Europe. I am prepared to try to write these files but like you don't know where to start so let me know the outcome of your request. Regards Dave

I have downloaded the ECU file from mu Hyundai I30 CRDI but would like to know if anyone has an XDF file to suit. I have found a utube clip using TunerPro to compare files so someone must be working on it. If not and if some one is interested in working with me to put one together please let me know...

I am trying to setup RT on a new laptop and I get an error message saying it cannot start because mfc100.dll is missing. I have tried the Microsoft fix but it still keeps saying the same message. Any help would be much appreciated. Thanks for reading Dave

Yes your right with what you say. I an a member of Delco Hacking but waiting to get into the $12 discussion group. I have spoken with a friend of mine who says the same as you that maybe it cannot accept negative values. I am not concerned as the negs are only a few and in the low rpm range. What I ...

Sorry for the delay in getting back to you. The $12 is from the Delcohacking website in a ose$12p folder. Looking at the screen in front of me I cannot see how to attach a copy. Hope you can find it.

It's $12P

I have looked into the XDF file but cannot see where it can be changed. Can you help with some advice. Thanks Dave

Hello. I am totally new to TunerPro but like what I see. The problem I have is when I enter a minus setting into the ignition map it reverts to zero when I save it. Any advice would be appreciated. Thanks Dave