TunerPro User Forum

Causes program to hang, have to restart. It sometimes works, sometimes not.

Ver 5.00.8040.00 RT

I've been spending some time looking at the code for these DME's. I found the 2 eproms has different Checksums, this was down to the DME ID section found at $ DME1 / DME2 1E20: 33 34 1E21: 37 36 1E22: 32 31 1E24: 30 31 1E25: 39 34 5 difference(s) found. It was the details printed on the white sticke...

Here you go, this should sort you out http://db.tt/twelWG2q

An EPROM will always be binary (0's and 1's) the ECU reads the data from the EPROM as either highs (1) or lows (0) the strings of zeros and ones are instructions for the main processor to carry out commands or data values for certain operations. You have probably opened the bin file in a reader that...

Ok I now have an XDF for my DME's I can start work on my car. Does anyone have any experiance using 2 Ostrich 2's at the same time? 1 for each DME. Would EmUtility be the best way to go ? Or would using 2 computers be better ? Has anyone attempted BMW V12 setup with Emulators in the past? I have to ...

Hi Guys, I'm doing a little experiment with my 850CSi and need an XDF for the DME's. I have read the original file from one of the DME's, it's available here: https://dl.dropbox.com/u/76310913/850csi267357954middleECU.bin In Hex the file shows similar strings to the standard 850 bin but the 352 XDF ...