Tune Questions

derrin · Post by **derrin** » Tue Nov 06, 2007 10:49 am

Well to start i am new to this program and hardwear. However i have been tuning using other systems.

I am tuning a customers 91 syclone today and need to make sure somethings are right. the pcm is 7749 i have the moates setup working
datalogging read/burn chips. 58rr_v14*xdf

1.
The customer has 55 lb injectors were to i check to make sure this program knows that?

2. customer had several chips i read them all. Started to adjust the one were the car ran the best, first thing that i notice is on the tunes i don't want the a/f tarket is 14.7. on the tune i want is stays at 10
why is this?

3. What turns on premium fuel?

4. is there a problem making more boost pressure than desired?

well hows that for a start?
looking at more info now.
thanks for your help.

derrin · Post by **derrin** » Tue Nov 06, 2007 3:55 pm

Was this post suppose to be under gm tuning?
ok i can answer some of my own questions.
The customer has 50 lb injectors not 55 tune i am using i know is set for stock were do i adjust for them?
the tune i am using also is for a 2 bar map and the car has a 3bar
were are those changes made
Boost is not cpu controlled, ext. wategate
isn't there a place on the web that expains this i hope so i hate feeling like this, using to much of peoples time.
A guy just called me from mexico and wants me to tell him his compresson over the phone while he cranks on the car.
i degress

Six_Shooter · Post by **Six_Shooter** » Tue Nov 06, 2007 4:07 pm

What bin file are you using?

You may be better off starting with $59 than $58, due to the fact that you have a 3 BAR MAP sensor already.

It is freeware, but the creators of the code $59 have some specific requirments when it comes to tuners that charge for thier services.

derrin · Post by **derrin** » Tue Nov 06, 2007 5:14 pm

i really don't know the exact answer.
the bin file that i am adjusting i read off of one of the customers "stock" chips. the bin file was from kennie belle that he got when the turbo and motor were upgraded, however he had a 2bar map at the time and stock injectors

moates told me to use the rr58_v14 xdl file to datalog
the cpu is a 7749

so i should contact code59 and see what they say?

Six_Shooter · Post by **Six_Shooter** » Tue Nov 06, 2007 5:22 pm

Just read through thier aggrement to terms of use, if you agree with it, then I don't see it being a problem. To verify you can contact Turbodig or one of the other admins and check with them.

code59.org

derrin · Post by **derrin** » Tue Nov 13, 2007 11:47 am

Thanks for the info Six
went and programed $59 to the chip and i roughed in the vehicle last week, im getting the ostrick this week and doing somemore.

Six_Shooter · Post by **Six_Shooter** » Tue Nov 13, 2007 2:00 pm

No problem, just remember to post up the tune, to share with the rest of the community.