This is probably something for Mark;
I'll give the specifics of my setup and see if there's something I missed.
Running Translator Pro as my "emulator".
TunerPro RT v5.00.6156 with the following files loaded:
TPro520vehicle0test3.xdf
TPro520.adx
When I fire up TunerPro it sees my hardware
When I go into Tools/Preferences/Data Acq./Emulation/Interface Type and select "AutoProm/MAFTPro" and click the Acquire Data(connect/disconnect) button all that happens is a constant "DA Connecting" at the bottom of the screen with no data connection occuring.
When I go into Tools/Preferences/Data Acq./Emulation/Interface Type and select "Use Plug-in" and click the Acquire Data(connect/disconnect) button, I then get an instant connection and data acq occurs normally.
I know this may be a nit picky point, but shouldn't I be able to connect when I have Translator Pro selected as my interface type?
Everything else is working perfectly.
Translator Pro DA Connect issue
Moderators: Mangus, robertisaar, dex