Page 1 of 1
Motronic M2.7
Posted: Sat Jul 18, 2009 3:08 am
by edkmho
Hi all expert and guru,
Has anyone tried TunerPro with Motronic M2.7. I am looking to tune a Fiat Punto GT 1.4 (Turbo) with this particular ECU. Hope someone can shed some light in this matter.
Thanks.
Posted: Sat Jul 18, 2009 11:06 am
by tom
I also wanted XDF for ME 2.7 from VW Golf VR6, anyone help me??
Posted: Sat Jul 18, 2009 11:19 pm
by revlimit
Motronic ecus from early 90s for VW are easy. I looked at the VR6 motronic 2.8 bin file and it looks similar to BMW.
However every ECU has its own bin file and XDF file would have to be authored for each bin file, it is not one fits all like nissan ecu
Posted: Mon Jul 20, 2009 12:28 pm
by tom
revlimit wrote:Motronic ecus from early 90s for VW are easy. I looked at the VR6 motronic 2.8 bin file and it looks similar to BMW.
However every ECU has its own bin file and XDF file would have to be authored for each bin file, it is not one fits all like nissan ecu
So if it easy, could you help me?? I try tuned file from VW Corrado 2.9 with Motronic 2.9.1
Posted: Tue Jul 21, 2009 9:32 am
by revlimit
So is this what you have?
Golf VR6 2.8 litre (AAA)
94-95
Bosch Motronic 2.91
0 261 203 222
021 906 258 BM
0 261 203 223
Posted: Wed Jul 22, 2009 3:30 am
by tom
My bin is from VW 2.9 with Motronic 2.9.1
021 906 258 AG number ECU
Posted: Wed Jul 22, 2009 10:57 am
by revlimit
I can't help you , you are not providing any information on to what I need to help you with.
Posted: Thu Jul 23, 2009 1:40 am
by edkmho
revlimit,
Any idea how to go about with the Motronic M2.7? Please help
Posted: Wed Jul 29, 2009 5:38 pm
by revlimit
These are done and will be posted soon in Definition page
Posted: Sun Sep 06, 2009 12:53 am
by tom
I know where is rev limit in VR6 soft 0 261 203 219 (adress in hex CF00-CF01) but I don`t know formula, anybody help me??
Posted: Sun Sep 06, 2009 12:13 pm
by revlimit
so if it is two bytes, that is 16bit, then you got to know the stock rev limit cutout, 6500 for example then you use basic math to found out calculator of the 16bit data to match the stock rev limit. And this can be put into definition file.
Posted: Sat Nov 06, 2010 9:59 am
by x_system
Hi, i'm searching for 0 261 203 210/211, 021 906 258 CG .bin file, from vw passat vr6 2.8 engine with 4 wire MAF and 5 wire coilpack, could anybody help me ?
Thanks
Posted: Tue Nov 16, 2010 1:55 am
by zioweb
it works like a charm with the punto gt!!!
Posted: Wed Dec 08, 2010 1:54 am
by gkoutsis
I think the boost control xdf is incomplete. There are 2-3 maps missing and also the ones defined have a few mistakes.
Posted: Thu Mar 17, 2011 8:53 am
by gkoutsis
Looking for the injector constant for a GT2 with 841 ecu?
Any ideas guys?