Page 1 of 1
xdf for c20xe m2.5
Posted: Fri Jan 20, 2012 11:35 am
by taiajam
is there a or does someone has a simple xdf for this engine with the motronic 2.5 ecu?
part throttle - fuel and ignition
and WOT fuel and ignition
would do.
Posted: Sat Jan 21, 2012 4:54 pm
by taiajam
since there probably isnt 1, I would like to make my own xdf files so I can share and contribute.
But I've actually never did build a XDF file due to lack of knowledge (tried 1 time). I can locate some maps but i just dont know whats what. ofcourse there is a lack of experience... but some1 has to start somewhere.
obviously I want to make a XDF file for the motronic 2.5 ecu for the opel c20xe engine.
Im going to start on this tomorrow. some help would be needed and of course appreciated.
edited-----------------------------------------
ok so ive used winols to look at the hex data. and so far ive found some maps an put thos into tunerpro and made an xdf file.
how do i upload this? so people can chek it to see whats good of bad etc...
Posted: Fri Aug 16, 2013 9:55 am
by sjonv
hi,
i know this is old topic.
but i will do some test with same engine. have orderd ostrich 2.0 and will lett you know how it goes.
Have you some good results?
br johnny
Re: xdf for c20xe m2.5
Posted: Sun Jan 15, 2023 5:34 am
by t16_rally
No progress on this subject?