Page 1 of 1
Motronic 1.3
Posted: Wed May 01, 2013 7:18 am
by hlr
Hi! Is there any way to set revlimit more than 7000rpm? I put more and engine was stopped around 6200.
Posted: Wed May 01, 2013 11:00 am
by aboutton
what DME you are working with ?
Posted: Wed May 01, 2013 11:41 am
by hlr
I work with 0 261 200 380 and 0 261 200 173
Posted: Wed May 01, 2013 11:57 am
by aboutton
all motronic 1.3 ECUs can go up to 10200 rpm,
are you sure you are using the correct xdf for your file ?
Posted: Wed May 01, 2013 12:13 pm
by hlr
Is the XDF from tunerPro.net
I made a new eprom with a little less than 7000rpm, but untill now couldn`t check it.
Posted: Thu May 02, 2013 2:53 pm
by hlr
Think i got it. There should be 6 more positions for revlimit and limit buffer.
Posted: Fri May 03, 2013 6:16 pm
by tunesss
a
Posted: Sat May 04, 2013 2:39 am
by hlr
Revlimiters:
1: 42DD
2: 4309
3: 4335
4: 4361
5: 43D8
6: 43B9
7: 43E5
8: 4411
Buffers:
1: 42DE
2: 430A
3: 4336
4: 4362
5: 438E
6: 43BA
7: 43E6
8: 4412
I don`t know which of these ecu uses or not. I just set them all same.