TunerPro User Forum

Hi,

I have a E36 325i NV with a 402 ecu. I'm trying to raise the rev limit. I've raised to 7400rpm and as I understand once the rpm raises over 6400rpm the ecu uses the values found at 6400rpm.

I've changed the rpm column in all the tables to reflect the rpm increase, but that only seems to alter the DXF not the BIN file.

How can I write in the BIN file in each table the corresponding rpm increase?

Thanks!

send me to my email the bin file you want to use and the RPM values and ill do it for you.

You need to change the values in the bin file and if you are not familiar with HEX code, you better let the experts do it .