TunerPro User Forum

Hi How’s your project going these days? I’ve recently built a small mini-tool for my motorcycle project. It’s a simple software utility written in C that controls the break signal directly, and so far the test results have been very promising. I’d be happy to help if you’re still working on this. Wo...

The HealTech OBD is able to communicate with the Kawasaki Jetski ECU, and in theory TunerPro RT can work with it as well — but only if a custom ADX file is created specifically for this protocol. That is where the real challenge lies. Kawasaki uses KWP2000 over K-Line with manufacturer-specific (non...

I tried something similar before on a 2017 Kawasaki SXR1500. In my case, I didn’t use Healtech; instead, I used a Kawasaki Marine diagnostic tool and captured the communication traffic to analyze the message structure. From what I observed, Kawasaki uses KWP2000 fast-init only for ECU wake-up (ISO 1...

I am currently learning to develop a plugin for TunerPro RT to handle specific fast initialization sequences by directly controlling the FTDI USB device through its driver, referencing examples from the TunerPro SDK. The main purpose of this plugin is to perform the fast init sequence accurately and...

Actually in my case, I didn’t run into any issues. Once I got the initial sequence done manually with the Arduino, everything worked perfectly. After that, I handed over control to the ADX file, which handled the data streaming just fine. The transition between Arduino to ADX (via UART) was seamless...

I ran into the exact same challenge when working on an ADX file for a Honda motorcycle ECU using a non-standard K-Line protocol based on 10400 baud (manufacturer-specific protocol). I tried lowering the baud rate and sending 1byte 0x00 at 184 baud (fake break) on UART to pull the line low, combined ...

Interesting project If you're already building an ADX file, it suggests that you know the expected data stream and ECU protocol fairly well. From what you've described (9600 baud, line idles at 12V, active low for data), it sounds very similar to a K-Line style interface (ISO 9141 / KWP2000), though...

OBDLink SX etc. based on ELM327 see TunerPro Plug-ins download https://www.tunerpro.net/downloadPlugins.html

Hi Honda owner or anyone who's interested in tuning your motorcycle on TunerPro tuning platform we are pleased to offer add-on ADX files or data stream definitions for tuner to make it easier if you are interested please contact me for more details and prices TunerPro ADX files data stream definitio...

data acq tab available on Tunerpro RT only

TP stop working not responding everything stops can't click when select any sent commands in ADX Editor I found
this problem after last update build.9993 from.9827 on Windows 11, 7 tested by TunerProELM327_ReferenceV1.adx

you can post .bin files here or PM to me maybe I can help for XDF

Dear Mangus
build .9816 look like all plug-in.dll missing in drop down manu |Preferences|Data acq. I/O component Please check

solved please check in latest build .9513 version on download page

need help to config my ELM ADX file for request Fuel Rail Pressure parameter in Service 01 PID 6D this note is correct ? send command Hex cmd string : 0x4D 0x30 0x31 0x50 0x30 0x44 0x53 0x30 0x36 0x52 0x31 ASCII string: M01P0DS06R1 listen Packet Packet Type: Static Packet size timeout: 400 ms Payloa...

label function, I'm not sure exactly but I can try like this
I don't know this is what you expected or not

https://drive.google.com/file/d/13eeYFl ... sp=sharing

Hi everyone need help to config my ELM ADX for request Fuel Rail Pressure parameter Service 01 PID 6D this note is correct? send command Hex cmd string : 0x4D 0x30 0x31 0x50 0x30 0x44 0x53 0x30 0x36 0x52 0x31 ASCII string : M01P6DS06R1 listen Packet Packet Type : Static Packet size timeout : 400 ms ...

PM

HI,
did you get .BIN files from ECU already?

What's the KEIHIN ECU number part? 89661-xxx-xxx
I want to know the correct file size. Bin 48kb or 64kb?
and you should have to get.Xdf file to open, edit them

if you interested
PM me

Looks like someone has ever answered about this "ELM327 is often used with software for standard OBD2 communication and has built-in support for most common OBD2 protocols. The software communicates with the interface using a special ELM327 protocol. For the stuff in this thread, a "passiv...

Hi everyone I'm a beginner please advise. my question is possible to create plug-ins ADX for VAG-KKL Cable? It would be great if we can look live parameter and able to record track on the map in Tunerpro RT software. The ELM327 device seems to be working properly now I'm using the VAG-KKL cable base...