Dear All
Sorry for my english
I'm a beginner and i have a OSTRICH 2.0 i want to use for emulation
-i have readed the BIN of my Lancia after
-whit ostrich
-I connect it in the place of the EPROM, with red line on the top of the soket
-Ostrich setup 28pin
-i use Tuner pro
-I load the BIN of the eprom
-i upload the bin on the ostrich successfully
-and after i try to emulate
- i have this on the bar
https://drive.google.com/open?id=0B_OR4 ... authuser=0
[Emulating] [Hardware: Ostrich 20.9.0] [Ready]...
But the car don't run
I tryed also the EmuUtility
Whit the same original BIN file
https://drive.google.com/open?id=0B_OR4 ... authuser=0
and the result is the same
I miss some step?
what i can check?
Thanks in advance
Ostrich 2.0 emulator issue
Moderators: Mangus, robertisaar, dex
first problem found
I have found the first problem
was the configuration of the EmuUtility
as the picture show the problem was the END JUSTIFY flag
begause of the dimension of my file it was stored at the end of the Ostrich memory.
https://drive.google.com/open?id=0B_OR4 ... authuser=0
Now loading the file with EmuUtility my car run perfectly
was the configuration of the EmuUtility
as the picture show the problem was the END JUSTIFY flag
begause of the dimension of my file it was stored at the end of the Ostrich memory.
https://drive.google.com/open?id=0B_OR4 ... authuser=0
Now loading the file with EmuUtility my car run perfectly
New issue loading file First 2 byte different
As you can see in the previous post
my ostrich 2.0 uploading the file using EmuUtility work well.
But...
Uploading the file in ostrich using tunerproRT i have the following problem.
The first 2 byte of the file are different .
if i read the ostrich using an eprom programmer i see that
the first 2 byte are different from the original and the car does not run
https://drive.google.com/open?id=0B_OR4 ... authuser=0
Thanks for help
my ostrich 2.0 uploading the file using EmuUtility work well.
But...
Uploading the file in ostrich using tunerproRT i have the following problem.
The first 2 byte of the file are different .
if i read the ostrich using an eprom programmer i see that
the first 2 byte are different from the original and the car does not run
https://drive.google.com/open?id=0B_OR4 ... authuser=0
Thanks for help