Hi, if I create an XDF everything works fine except if I try to edit the number of Rows.
If I modify a table after it has been created and saved, the software hangs and then closes after a few seconds.
This is on the latest release and it did not do it before?
Any help welcome?
Regards
Rich
Shutdown after changing number of rows
Moderators: Mangus, robertisaar, dex
Re: Shutdown after changing number of rows
Hi Rich,
I'm just acknowledging your report and confirming that we're working on this via email.
-M
I'm just acknowledging your report and confirming that we're working on this via email.
-M
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am
Re: Shutdown after changing number of rows
Hello,
I have the exact same issue. In my case it happens when changing rows or colums.
I attached two screenshots, where this happens. After clicking apply the software shuts down without error or messagebox.
In the Windows-Logs it shows this error:
Processmonitor shows only this:
I have the exact same issue. In my case it happens when changing rows or colums.
I attached two screenshots, where this happens. After clicking apply the software shuts down without error or messagebox.
In the Windows-Logs it shows this error:
Code: Select all
Name der fehlerhaften Anwendung: TunerPro.exe, Version: 5.0.9332.0, Zeitstempel: 0x60a4b2e7
Name des fehlerhaften Moduls: TunerPro.exe, Version: 5.0.9332.0, Zeitstempel: 0x60a4b2e7
Ausnahmecode: 0xc0000005
Fehleroffset: 0x0001423d
ID des fehlerhaften Prozesses: 0x17bc
Startzeit der fehlerhaften Anwendung: 0x01d7e538e799bd08
Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\TunerPro\TunerPro.exe
Pfad des fehlerhaften Moduls: C:\Program Files (x86)\TunerPro\TunerPro.exe
Berichtskennung: bc4c1a42-130d-41ae-a1a4-d9ea8fa0453b
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Re: Shutdown after changing number of rows
Hello. Thanks for reporting this. Please email me the XDF and the list of steps to reproduce and I'll get it fixed.
***************************************
TunerPro Author
1989 Trans Am
TunerPro Author
1989 Trans Am
-
- Posts: 29
- Joined: Sat Aug 31, 2013 7:27 am
Re: Shutdown after changing number of rows
I had same problem, last version solved it, thanks Mangus.