TunerPro User Forum

Hallo, i have created a tool for old Bosch Motronic binary files. I think it works with the eprom style ones. The tool searches the jumptable (map address table) and creates an XDF file. I have tested with 10 files. Problems: BMW M50B25TU 0261200413 1267357623 -> jumptable with holes in it, so the X...

You would put the equations in the rows/columns of the data, in the conversion tab of a table you should see rows and columns that you can add the equations to. And the documentation for the program you can find information on how to do this. Does not need to be external axis. Can you show me a pic...

nomecone wrote: ↑Thu May 01, 2025 5:37 am (256-255)*40 = 40 this does not seem right. Should be zero.
(255-255)*40 = 0 this seems right to me

-> 256 is right.

Hallo, is this only with an external axis possible? I have tried with internal axis - there is nothing to put the conversion for each axis point in.

Today i have used the history tables first time. Nice thing. Why are the maximum "history size (samples)" are set to 100? I think, it is good if this would be higher. What is the difference between "history average" and "running average" Maybe it is possible to add &quo...

I have e-mailed moates support.
Now it works. In XDF Header i have changed "bin size" to 0x10000.
Now it works.
I have never changes this value. So i wonder how it works bevor with wrong setting.

i have figured out:
1.
-upload in TP RP 64KB file
-download data with TP RP -> wrong data, only 32kb download
This is in all 4 posible switch configurations.
2.
-upload 32kb file
-download -> right data!

maybe there is something wrong with the switches?

Any ideas?

...same problem again. :-( I upload a file in TP RT to the ostrich, verify: ok. Ich download the file from the ostrich - it's not the same i have upload. -switch move many times, same problem -disconnects the ribbon calbe from the ostrich, same problem -an other USB cable, same problem -an othe Lapt...

look at the end of the video. English.

no, this is the map table. You can see the increasing byte.

The feature allready exits:
https://youtu.be/4cbeXHrYra0
Toos->Hardware Utilities->Address Watch Utility

Hello, is it possible to count the used cells while TunerPRO/ostrich is in hit tracing mode? I have a video, look at the link. This is a trace of my address table. I cant get any informatioen out of the trace. If TunerPro would count the hits, the trace may be usefull? This feature maybe change the ...

i have solved the problem: -may be i have change position of the switches or this: http://support.moates.net/troubleshooting-switches/ -Fortunately, the solution to switch glitching is really easy. Sliding the switch back and forth vigorously 5-10 times has been successful in restoring normal operat...

next test: the EPROM burner reads everytime the same data from the ostrich, it dosent mather what i laod with tunerProRT into the ostrich 2.0. If i press "verify" in TunerPro RT -> sucsess. For TunerProRT the data is in the Ostrich - but the EPROM Burner reads out always the same wrong dat...

Hallo, last year my Ostrich 2.0 works fine. Today i have put it again in my car. The car does not start. Ich have put the Ostrich 2.0 on my EPROM Burner. When i read the file with the burner from the Ostrich 2.0, it is not the same i have laoded up in TunerPro RT. ?? I save the wrong data form the E...

Hallo, this is from moates about ostrich 2.0: "We do NOT offer any tools for datalogging on These (BMW) ECUs. A very limited amount of data can be gathered using the “trace” feature of the Ostrich2, which lets you see which data in a ROM is being actively accessed. There is NO history or loggin...

Hello, thank you for this very useful TunerPro RT software. I have a Ostrich 2.0 and a innovate LC1 wideband cable. With an adx file, i can see in TP the O2 value. There is the option address hit tracing with the ostrich 2.0. Is it possible to datalog the O2 value when the ostrich is hit tracing? So...