TunerPro User Forum

TPI , and this PCM got 2*512 flash chip with plcc footprints.One major issue is that it will need 2 emulators working together or a clever 1024 emulator with 2 ribbon cables and some hardware config to control each side separately hooked up to TP.I think most guys feel that 3-4min to reflash the PCM...

Hi Can someone explain why it is so difficult to get real time emulation on the 94-95 PCM , I mean real time works great on the previous ECU´s and TP can handle the Bins allready.I know it uses 2 external flash memorys one for the E-side and one for the T-side , have somebody tried to desolder one o...

How is it possible to add both Engineside and Tranyside in TP ECU file,
It holds 2 64Kb flash prom with same addressing , could I add 10h like TC do? and run it in series. E-side 0000h-FFFFh -> 100000h-200000h with the same Checksum

Hi Guy´s Is there anyone ho knows how to make a Bootloder program for a 94-95 PCM , it has dual 68HC11F1 processors with 512 bytes memory. Have some PCM´s that holted during programming and desoldering those Flashchip is starting to bug me.Dont know much about programming but if someone can point me...

Try this link http://www.rceng.com/technical.htm

Hi , Is there any progress with this Datastream editor

Mark , I viewed some posts and it seem´s there´s not any copy-able featuers pland , but how about a calculation function "offline" or even better "Online" based on ALDL parameters when ALDL logging are working in TP , then users can do their own Calculation. Seem´s my first conve...

Found the problem it was table direction "By columns" not "By rows"

Duh

Thanks for the clarification on TP Edit functions , it works well now :D . But now I have a table problem most tables are easy to convert but 2 have values placed wrong , meaning that values from the top of the table is placed in the middle and vice versa it only applys to tables "TCC Lock/Unlo...

OK I hold with Datastream files. Started with the convertion off my TC def-files and got stuck on some things , maybe someone can help me out. In the TDF Editor there is a value called "Exponential Scale Factor" and when set to -1 I dont know where to convert that in TunerPro´s ECU Editor ...

I´m planing to convert my TC def-files to ECU-files useing TDF from TC ,
but to have it all in one SW I also need Datastream protocols , anyone know how to do that? have tried at thirdgen.org but no luck.

ps what is a poll?