TunerPro User Forum

Should probably mention win7 pro 32 on an i3 laptop also.

Tools, Preferences, Data Acquisition, Configure Plug-In component gets me a dialog with a 'test for valid interface...' button that says it found the cable. When I click the Acquire Data button it says in pinkish on the bottom of the screen 'DA: Connecting...' and that's as far as it goes. It looks ...

I tried both with the 10K and without. The device manager shows com7 for the ALDL and com 8 for the Ostrich.

I just got a Moates Xtreme ALDL, but I don't seem to be able to connect to it. The Acquire Data button should initiate the connection shouldn't it? This is for a supercharged Porsche 928 running a GMECM 1227749 with Code 59 firmware using an Ostrich emulator. The car starts and runs, I can upload an...

I'm trying to get a new setup working - new laptop - new os (win7-32) - new TP5 install. The target is a 1227749 controlling a Porsche V8 with a Vortech supercharger running $59, Ostrich, Max232 ALDL interface with serial to USB converter. I can emulate, start the car and run. I can't data log or ge...

http://s4wiki.com/wiki/Bosch_ME7.1

http://www.audizine.com/forum/showthrea ... 28ME7.1%29

Only about 30 of those tables are needed to tune this ecu. There is an xdf for the Audi S4 with ME7.1 that some guys on AudiWorld have developed. I've downloaded it and am going to try once I get the cable I ordered a couple of days ago.

Nobody with VW/Audi experience here? I am very interested in this platform also.

One Drone, how are you making out?

Has anyone successfully set up V5 to datalog with the Quarterhorse yet?

testing... 1,2,3... is this thing on?

The subject is a 1984 Porsche 928 5.0L v8 with a Vortech supercharger controlled by a GM1227749 ECM. I ran a similar configuration for several years and many track hours, it was running pretty well until I lost compression in 2 holes last fall. This spring I built a new engine... bigger throttle bod...