I havent done any programming before-never built a stroker motor till now so i am trainable... i have made the cable for the specs on http://www.geocities.com/MotorCity/Shop/1624/aldlif.jpgnewbe any help would be great
Moderators: Mangus, robertisaar, dex
-
keyman6868
- Posts: 1
- Joined: Sun Oct 28, 2007 7:04 pm
newbe any help would be great
Okay not to bore anyone, but im new to this stuff and need some help i have a 95 lt1 camaro with a 383 stroker motor. Lingenfelter Camshafts L98, LT1, LT4 1987 - 96 TPI - Hyd Roller 213/219 .493/.502 HR112 with 1 to 6 ratio roller rockers. 11.5 to 1 forged pistons. king racing bearings edelbrock tes headers. i bounce of the rev limiter and then shift to 2nd gear. I also have problems at idle at normal operating temps- idle to low. when it is cold its fine. I know i also need to raise the rpm range. NO PROGRAMMING HAS BEEN EVER DONE ON THIS CAR. (virgin) can anyone led me in the right dierections on the programming this beast. I havent done any programming before-never built a stroker motor till now so i am trainable... i have made the cable for the specs on http://www.geocities.com/MotorCity/Shop/1624/aldlif.jpg
I havent done any programming before-never built a stroker motor till now so i am trainable... i have made the cable for the specs on http://www.geocities.com/MotorCity/Shop/1624/aldlif.jpg