ok im getting irritated big time. i loaded all the drivers from my moates cd. i connect my burner/emulator and i get nothing. i have no idea how to connect this nor did i get any instructions that help out.
no step by step in structions anywhere. searching show nothing for me. is there anything out there for people trying to start from scratch?
no hardware detected
Moderators: Mangus, robertisaar, dex
-
Berettaspeed
- Posts: 9
- Joined: Mon Oct 29, 2007 5:04 pm
someone helped me with that and thanks,
Now i goto adjust my idle or
FUEL Low RPM VE % vs RPM:
I put my injector size in and divided that by 4.28 and took that number and put it into the single fire.
i think i disabled my egr as well but i dunno for sure. i have it maxed out in the if coolant <= area
my car will idle BAD and throw a damn code. then nothing works at all. i cant change anything then. how do i get this to stop?
Now i goto adjust my idle or
FUEL Low RPM VE % vs RPM:
I put my injector size in and divided that by 4.28 and took that number and put it into the single fire.
i think i disabled my egr as well but i dunno for sure. i have it maxed out in the if coolant <= area
my car will idle BAD and throw a damn code. then nothing works at all. i cant change anything then. how do i get this to stop?
-
jakes85440
- Posts: 1
- Joined: Sat May 09, 2009 10:33 am
I have the same problem. New user, no instructions, says it is not connected when it is. I know I need to download the Definition file for my ECM, and found out which one on Motes web site, but it doesnt appear to be in the correct format when I try to save it under Bin Def Files. I am highlighting the file, clicking "Save As" and putting it under TUnerpro Definition files, is this correct? How did you get yours to work?
Thanks,
By the way I have a 95 Suburban with a 5.7L and the .OD Def file.
ECM number is 16197427
Thanks,
By the way I have a 95 Suburban with a 5.7L and the .OD Def file.
ECM number is 16197427