Bin Stacking Order

bataradena · Post by **bataradena** » Wed May 21, 2003 6:46 am

I just created a stack bin file (bin=4K, chip size=32K and switch block=4k) and did some testing to make sure I had everything in the correct order. I notice the order of building the bin file is backward to what I would expect. I am building my own Expander Board for the 747ECM using 28C256 EEprom IC and would assumed Position “0” would be no Hex-Offset and Position-1 would have a offset of 4K and so one... I have a Word Doc. showing my result and would be happy top send it to anyone interested.
Byron Taradena

Post by **Mangus** » Wed May 21, 2003 7:55 am

the stacker was designed for craig moates bin switching device, which requires the bins stacked in reverse order.