New to TurnerPro... Need '88 Fiero 2.5l 5-speed definition

gregvwilliams · Post by **gregvwilliams** » Wed Apr 27, 2011 1:42 pm

Need '88 Fiero 2.5l 5-speed definition file for v5. I have the cable and software ready to go. I just need to eliminate any snafu's on the first attempt on using v5. There maybe a existing definition I can use, but I don't know enough to know what I don't know (or need to know) at this point. Installed the software and it recognizes the USB interface cable

The software looks very professional and well thought out.

A side note would be a way to share dashboard definitions between members. The cut-and-paste to edit to the definition file would be fine with me.

Best regards to all.... greg.

EagleMark · Post by **EagleMark** » Fri Apr 29, 2011 6:28 am

There's a link on top of definition page most people overlook...

http://tunerpro.net/gmOBDI.htm

For saving dashboards we did work on that here and over on
http://www.eagle-mark.com/Forums/

We are accumulating bin and def files there to help Mark with deveopment of the software. So far like 600 bins and 200 defs and 200 wiring diagrams. HTH!

d-fens_ · Post by **d-fens_** » Wed Jul 20, 2011 5:20 am

nooooooooooooooooooooooo...................

i searched the intewebs and beyond but this page with the existing definitin for a A043 stream would have saved me ....
hours!:twisted:

well i learnd a lot but PLEASE place this link much mor prominently!!!