92 CORVETTE MEMCAL

[JOHN QUINTUS]

HAVING A PROBLEM WITH READING MY MEMCAL . DO I PUT THE
BUFFER START AT 0
DEVICE START AT 0
END BUFFER AT 7FFF ???

ALL I GET IS JUNK WHEN USING 8D MASK WHICH I IMPORTED FROM
THE ECU FILE. WHAT AM I DOING WRONG THANKS.

NOTE: THE EPROM HAS A LABLE ON IT WHICH SAYS DELCO 5224

[JP86SS]

000000 -> 007FFF is the correct setting for the $8D.
it is a 32K bin file.

Here are all the offset types and details
http://www.moates.net/documentation.php ... tion_id=75

Be sure the chip is not backwards in the reader.

[JOHN QUINTUS]

THANKS FOR YOUR REPLY, THIS IS MY PROBLEM-- I HAVE READ THE
MEMCAL STARTING AT "0" AND GET A CHECK SUM OF E6B0
SAVED FILE SIZE OF 8000

WHEN VIEWING THE HEX CODE THIER IS DATA FROM- 0 HEX TO EE4 THEN DATA PICKS UP AGIAN AT
2000 THRU 7D0B THEN

ZERO'S TO 7FA0 THEN DATA TO END 7FFF

I DON'T KNOW IF THIS CORRECT OR IS MY MASK NOT RIGHT
THIS ALL FOR 92 CORVETTE THANKS FOR YOUR HELP.

[robertisaar]

a 92 corvette should be DA, not 8D. it is a LT1, right?

[JOHN QUINTUS]

THANKS YOUR RIGHT IN BOTH CASES AFTER SELECTING THE DA2 MASK
DATA LOOKS GOOD, ALL THOUGH IT DOESN'T LOOK VERY COMPLETE SUCH AS UNDER "FLAGS/SWITCHES " THERE IS ONLY ONE ITEM LISTED 'VATS DIAGNOSTIC' IS THIS CORRECT OR IS THERE A MASK THAT IS MORE COMPLETE THANKS VERY MUCH.

[robertisaar]

i think you can turn off the caps lock

and depending on which XDF you have, i might have a more complete one somewhere.

[JOHN QUINTUS]

sorry for the caps lock

[robertisaar]

i just counted 24 flags in the XDF i use for DA2.

i can send it to you in an e-mail if that's alright with you.

[JOHN QUINTUS]

That would be great thanks again.